Features of mold monitor:

1. Simple operation;

2. Fast processing;

3. Fine/close inspection;

4. Abnormal picture storage;

5. Templates can only be sorted;

6. Multi-camera detection.

The purpose of the mold monitor:

1. Product defect detection after mold opening;

2. Detect the position of the thimble;

3. Foreign body detection inside the mold;

4. Check whether the product falls off;

5. Whether the position of the embedded parts is correct;

6. Check whether the slider and thimble return to the correct position, and whether the core is pulled in reliably.

Mold monitor monitoring process:

1. After installing the mold monitor, adjust the camera light source to make the detection area meet the measurement conditions, and formally enter the detection mode after setting the template.

2. After the injection molding machine is formed, the mold monitor is tested after the mold opening signal is obtained. At the same time, it does not affect the manipulator to grab the product. The normal mold monitor does not work, and the re-inspection is performed after the abnormality is detected. If it is still abnormal, the technician will be notified. abnormal.

3. After the manipulator grabs the product, perform a second inspection. If the result is normal, the mold clamping signal is allowed, and the re-inspection is performed after an abnormality occurs. If it is still abnormal, an alarm will notify the technician to handle the abnormality, and the door will be closed and the mold clamping signal will be sent.